000			03756nam a22003137a 4500
003			OSt
005			20250422224814.0
008			240603b ||||| |||| 00| 0 eng d
040			_bEnglish. _cCvSU-CCAT Campus Library. _erda.
050			_aUM TS 875 _bD34 2011
100			_aDaganasol, Juan Paula L., author. _913389
245			_aCCS particle board as an alternative source of lawanit / _cJuan Paulo L. Daganasol, Mark Emill F. Dela Cruz, and Sedrick Jedge C. Esguerra.
260			_aRosario, Cavite : _bCavite State University-CCAT Campus, _c2011
300			_axvi, 56 leaves : _billustrations ; _c28 cm
500			_aResearch Study (LSHS) -- Cavite State University-CCAT Campus, 2011.
504			_aIncludes bibliographical references and appendices.
520			_aDaganasol, Juan Paulo L., dela Cruz, Mark Emill F., Esguerra, Sedrick Jedge C., Science Education Laboratory School Cavite State University Rosario Campus Rosario, Cavite 2009-2011, "Ccs Particle Board as An Alternative Source Of Lawanit " Adviser Prof. Remedios G. Lisondra The research study entitled "CCS Particle Board as an Alternative Source of Lawanit was conducted at Tejeros Convention Rosario, Cavite. Furthermore, the experiment and observations were made at the Department of Science and Technology Forest Products and Research Development Institute, U.P. Los Baños, Laguna. Generally, this study aimed to find if it is possible to use mixed coconut coir and corn silk as raw materials in making particle board. Specifically, this study aimed to determine the significant difference between the commercial Lawanit and the "Coco Coirn Silk Board" (CCS Board) in terms of strength, water absorption, thickness swelling and internal bond. This study used the Randomized Complete Block Design (RCBD) with three replications to determine the significant difference between the commercial Lawanit and the particle board. The statistical treatment applied was the formula for the Modulus of Rupture (MOR), Water Absorption, Thickness Swelling and Inter Bond given by the DOST - FPRDI. Moreover, the t- test was used to obtain the significant difference in the 4 properties. The coconut husks were gathered at a coconut stall in Tejeros Convention Rosario, Cavite. Some were provided by DOSTFPRDI; corn silks from Mr. Narciso Vergara and a corn stall in Divisoria. They were sun dried and coir were shredded firmly and were mixed together with the binder, phenol formaldehyde, in the shallow tub according to the following treatments To Commercial Lawanit, [T1-75% (275 g) Coir + 25% (92 g) Silk, T2-50% (184 g) coir + 50% (184 g) Silk, T3-75% (275 g) Silk + 25% (92 g) silk). Then it was molded on a wooden molder. Molder was removed from the treatment and was "hot pressed" After, was then the boards were cut into dimensions and were tested in terms of strength, water absorption, thickness swelling and internal bond and the data were analyzed. Results showed that the three treatments and the commercial Lawanit have a significant difference in terms of strength, water absorption, thickness swelling and internal bond. The results of t-test were greater than the tabular value of ± 2.92
546			_aIn English text.
650			_aParticle board making. _916311
650			_aCoconut coirn particle board. _916312
650			_aCoirn silk particle board. _916313
650			_aComparative analytic of particle boards. _916314
700			_aDela Cruz, Mark Emill F., author. _913390
700			_aEsguerra, Sedrick Jedge C., author. _913391
700			_aLisondra, Remedios G., adviser. _99972
700			_aMerced, Cardad S., technical critic. _913392
942			_2lcc _cT/M/D _kUM _hTS 875 D34 2011
999			_c3591 _d3591