| 000 | 02604nam a22003017a 4500 | ||
|---|---|---|---|
| 003 | OSt | ||
| 005 | 20240402195214.0 | ||
| 008 | 220816b ||||| |||| 00| 0 eng d | ||
| 040 |
_aCvSU-CCAT Campus Library. _bEnglish. _cCvSU-CCAT Campus Library. _erda. |
||
| 050 |
_aUM TJ 1260 _bH56 2017 |
||
| 100 |
_aHinalog, Darren Christopher P., Author _96629 |
||
| 245 |
_aDevelopment of Go and No Go Gage / _cDarren Christopher P. Hinalog and Raymond A. Toledo. |
||
| 260 |
_aRosario, Cavite : _bCavite State University-CCAT Campus, _c2017. |
||
| 300 |
_axi, 43 leaves : _billustrations ; _c28 cm |
||
| 500 | _aUndergraduate Thesis (BSIT)--Cavite State University-CCAT Campus, 2017. | ||
| 504 | _aIncludes bibliographical references and appemdices. | ||
| 520 | _aHINALOG, DARREN CHRISTOPHER P. and TOLEDO, RAYMOND A. Development of Go and No Go Gage.Undergraduate design project. Bachelor of Science and Industrial Technology Major in Mechanical Technology.Cavite State University Rosario Campus, Rosario, Cavite. March 2016. Adviser. Mr. Nestor Alvarez. Technical critic: Mr. Romulo B. Isorena. The study was conducted from July 2015 to February 2016 to develop and evaluate a Go and No Go gage instrument. This study aimed to; 1) design the Go and No Go gage; 2) construct it using available supplies and material in the local market; 3) evaluate the functionality and accuracy of the project; and 4) conduct cost analysis of the project. Go and No Go gage was constructed with 5 different sizes of 12mm,14mm, 16mm,18mm and 20mm. The instrument was used to determine the inside diameter of the pipe whether it was within the acceptable tolerance. The used of each gage was according to the diameter or the size of the hole of the work piece. The Go and No Go Gage was designed in accordance the International Tolerance Standard (ITS) and was machined with preciseness and ground to attain the desired surface finish. The Go and No Go Gage was commonly used in machining and quality control of mass produced parts. The accuracy in measurements of the Go and No Go Gage was more dependable than that of the Vernier Caliper and more convenient and faster to use. | ||
| 546 | _aIn English text. | ||
| 650 |
_aGauge instrument. _99946 |
||
| 650 |
_aInstrument. _99947 |
||
| 650 |
_aVernier caliper. _99948 |
||
| 650 |
_aMeasurements. _99949 |
||
| 700 |
_aToledo, Raymond A., author _96630 |
||
| 700 |
_aAlvarez, Nestor M., adviser _95915 |
||
| 700 |
_aIsorena, Romulo B., technical critic. _95993 |
||
| 942 |
_2lcc _cT/M/D _hTJ 1260 H56 2017 _kUM |
||
| 999 |
_c1938 _d1938 |
||