000			03090nam a22003257a 4500
003			OSt
005			20250320224624.0
008			220815b ||||| |||| 00| 0 eng d
040			_aCvSU-CCAT Campus Library. _bEnglish. _cCvSU-CCAT Campus Library. _erda.
050			_aUM TK 2941 _bD45 2017
100			_aDel Rosario, Mark John V., author _96573
245			_aDevelopment of 50 amperes storage battery charger / _cMark John V. De Rosario, Jomar B. Emelo
260			_aRosario, Cavite : _bCavite State University-CCAT Campus, _c2017.
300			_axii, 48 leaves : _billustrations ; _c28 cm
500			_aDesign Project (BSIT Major in Stationary Marine Technology) -- Cavite State University-CCAT Campus, 2017.
504			_aIncludes bibliographical references and appedices.
520			_aDEL ROSARIO, MARK JOHN V., and EMELO, JOMAR B., Development and Evaluation of 50 Amperes Storage Battery Charger.Undergraduate Project Design. Bachelor of Science in Industrial Technology major in Stationary Marine Technology Cavite State University,Rosario Campus, Rosario Cavite. March 2016. Adviser: Mr. Nemrod M. Zoleta. Technical critic: Mr. Josefino E. Ambayec. The study was conducted from July 2015 to March 2016 to develop and evaluate a 50 amperes storage battery charger. Specifically, the study aimed to: 1) design a 50 amperes storage battery charger; 2) construct the device using locally available materials; 3) evaluate the performance of the device in terms of the following; a) time and speed of charging, b) accuracy of the device,c) safety features of the prototype; and 5) conduct cost analysis of the 50 amperes storage battery charger. The 50 Amperes Storage Battery Charger was a device used to charge storage batteries for electro mobiles as well as for the high density storage batteries. It can accommodate three 24 volts batteries at the same time. The 50 amperes storage battery was composed of different electronics materials and other raw materials that were used to build the prototype. It can charge 12 volts and 24 volts battery at the same time.The 50 amperes storage battery can accommodate three batteries at the same while charging. The prototype has an auto cut-off features that is activated when the batteries are full charged. A timer was used to evaluate the charge duration of the battery while charging, then a volt meter is used to measure the volts emitted in the battery from the charger. The materials cost PHP 6,240 and the labor cost was PHP 1,500. The total initial cost of the project was PHP 8,540.
546			_aIn English text.
650			_aBattery charging. _915291
650			_aDesign and development. _914539
650			_aHigh-density storage batteries. _915292
650			_aCharging station. _915293
650			_aEnergy solutions. _915294
700			_aEmelo, Jomar B., author _96574
700			_aZoleta, Nemrod M., adviser _95860
700			_aAmbayec, Josefino E., technical critic _96346
942			_2lcc _cT/M/D _hTK 2941 D45 2017 _kUM
999			_c1924 _d1924