000			03920nam a22003257a 4500
003			OSt
005			20220816021041.0
008			220812b ||||| |||| 00| 0 eng d
040			_aCvSU-CCAT Campus Library. _bEnglish. _cCvSU-CCAT Campus Library. _erda.
050			_aUM TL214.C64 _bD48 2018
100			_aArica Jhon Austin M., Author _96407
245			_aDevelopment of Gasoline Engine Trainer / _cJhon Austin M. Arica... [and three others].
260			_aRosario, Cavite : _bCavite State University--CCAT Campus, _c2018
300			_axv, 65 leaves : _blllustrations ; _c28 cm
500			_aDesign Project (BSIT) Major in Stationary Marine Technology--Cavite State University-CCAT Campus, 2018.
504			_aIncludes bibliographical references and appendices.
520			_aABSTRACT ARICA, JHON AUSTIN M. JAVIER, JOHN ANGELO D.ONSANA, SIEGFRIED A. PABU-AYA, JIE. Development of Gasoline Engine Trainer. Undergraduate Thesis Bachelor of Science in Industrial Technology major in Stationary Marine Technology, Cavite State University -CCAT Campus, Rosario, Cavite. May 2018. Adviser: Mr. Josefino E.Ambayec. Technical critic: Mr. Danilo G. Santiago. The main purpose of the study was to develop a Gasoline Engine Trainer for Stationary Marine Technology. Specifically this study aimed to: (1) design a gasoline engine trainer; (2) construct a gasoline engine trainer; (3) evaluate the performance of gasoline engine trainer in terms of: functionality based on normal operation of gasoline engine and evaluating the gasoline engine trainer using self-made five learning elements. (4) conduct a cost analysis for the Gasoline Engine Trainer. This project is composed of the following major parts: 1) Spark plug which is used to ignite the fuel and cause a controlled explosion in the engine; 2) Valve are engine parts allow for fuel and air to enter the combustion chamber and later let the exhaust out; 3) Piston rings are a cylindrical piece of the metal that is located inside the cylinder of the engine; 4) Sump surrounding the crankshaft contains some amount of oil; 5) Cylinder block is a main part of an engine. It is a part in which combustion of fuel takes place. All other parts like piston, connecting rod, crankshaft, water jacket are bolted on it; 6) Cylinder Head is fitted on the top of the cylinder block and the function of the cylinder head is to seal the working end of cylinder and not to permit entry and exit of gases on cover head valves of the engine. The valves, spark plug, camshaft are fitted on it;7) Connecting Rod connects piston to the crank shaft and transmit the motion and the thrust of piston to crank shaft. The lower end of connecting rod is connected to the crank shaft, Crank shaft is located in the bottom end of cylinder block; Camshaft is fitted either in the cylinder head or at the bottom of the cylinder block. It is used to open or close valves at proper timing in multi-cylinder engine: 9) Push rod is used when the camshaft is situated in the bottom of the cylinder head. It regulates the timing of valve open and close through rocker arm and camshaft, manifold, it is bolted on the cylinder head one each for intake and exhaust. Its function is to evenly distribute air-fuel mixture for intake and collect the exhaust gases from all cylinders; and 10) the stand of gasoline engine which is movable.
546			_aIn English text.
650			_aGasoline Engine _96408
650			_aInstructional Materials _96124
650			_aPrototype, Engineering _95310
650			_aCost Analysis _95484
700			_aJavier, John Angelo D., Author. _96409
700			_aOnsana, Siegfried A., Author. _96410
700			_aPabu-Aya, Jie A., Author. _96411
700			_aAmbayec, Josefino E., Adviser. _95867
700			_aSantaiago, Danilo G., Technical critic. _96412
942			_cT/M/D _hTL214.C64 D48 2018 _kUM _2lcc
999			_c1888 _d1888