000 02991nam a22003377a 4500
003 OSt
005 20220810210534.0
008 220810b ||||| |||| 00| 0 eng d
040 _aCvSU-CCAT Campus Library.
_bEnglish.
_cCvSU-CCAT Campus Library.
_erda.
050 _aUM TL210
_bO23 2018
100 _aDe Ocampo, Melvin L., Author.
_96135
245 _aDevelopment of Fuel Injector Tester /
_cMelvin L. De Ocampo, Ziara B. Llemos, and Ronniel B. Parin.
260 _aRosario, Cavite :
_bCavite State university-CCAT Campus,
_c2018.
300 _axiv, 73 leaves :
_billustrations ;
_c28 cm
500 _aDesign Project (BSIT)Major in Automotive Technology--Cavite State University-CCAT Campus, 2018.
504 _aIncludes bibliographical references and appendices.
520 _aDE OCAMPO, MELVIN L., LLEMOS, ZIARA B., and PARIN, RONNIELL R., DEVELOPMENT OF FUEL INJECTOR TESTER, Undergraduate Thesis, Bachelor of Science in Industrial Technology. Cavite State University, Rosario, Cavite. March 2017. Adviser. Mr. Ariel G. Santos. Technical critic: Mr. Richard V. Dela Pena. The study was conducted from July 2015 to March 2017 to develop and evaluate a the fuel injector tester. Specifically,the study aimed to; 1) design and develop a fuel injector tester; 2) construct the device using locally available materials; 3) Evaluate the performance of the device in accordance to its operational limitations and measure the performance to the following test a) break-off pressure; b) operation in spray pattern; c) dribbling operation; 4) conduct cost analysis for the fuel injector tester. This project was considered to contribute to the Automotive Technology Department an additional training device to help automotive student enhance their skills through actual simulation in hand-on activities and to help automotive instructors acquire a fuel injector tester. The proponent considered the prototype the first of its kind in the campus to test diesel fuel injectors and to monitor if there was a problem. The fuel injector tester used on the monitoring of fuel spray and obstruction that blocks the flow of fluid inside injectors. The prototype was consist of hydraulic pump that capable of large amount of fluids from reservoir going to the fuel line connected to the injectors that hydraulically operated valve inserted to combustion chamber to metered the fuel. The total cost of the project was PHP. 14,221.00.
546 _aIn English text.
650 _aFuel injector
_96123
650 _aInstructional materials
_96124
650 _aInjectors
_96125
650 _aTraining device
_96126
650 _aPrototype, engineering
_95310
650 _aCost analysis
_95484
700 _aLlemos, Ziara B., Author.
_96127
700 _aParin, Ronniell B., Author.
_96128
700 _aSantos, Ariel G., Adviser.
_95814
700 _aDela Pena, Richard V., Technical critic.
_96012
942 _cT/M/D
_hTL210 O23 2018
_kUM
_2lcc
999 _c1846
_d1846