000			03033nam a22003137a 4500
003			OSt
005			20220810032345.0
008			220809b ||||| |||| 00| 0 eng d
040			_aCvSU-CCAT Campus Library. _bEnglish. _cCvSU-CCAT Campus Library. _erda.
050			_aUM TL255 _bJ66 2018
100			_aJonas, Vincent Angelo P., Author. _96008
245			_aDevelopment of Pressurized Brake Bleeder Pump / _cVincent Angelo P. Jonas, Jerome D. Luig, and Richmond Dave N. Celso.
260			_aRosario, Cavite : _bCavite State University-CCAT Campus, _c2018.
300			_axiii, 59 leaves : _billustrations ; _c28 cm
500			_aDesign Project (BSIT)with Specialization in Automotive Technology--Cavite State University-CCAT Campus, 2018.
504			_aIncludes bibliographical references and appendices.
520			_aJONAS, VINCENT ANGELO P.,LUIG,JEROME D., and CELZO,RICHMOND DAVE N. Development of Pressurized Brake Bleeder Pump. Design Project. Bachelor of Science Industrial Technology. Cavite State University-Cavite College of Arts and Trades Campus Rosario, Cavite. May 2018. Dr. Ariel G. Santos. Technical Critic: Mr. Richard V. Dela Peña. The study entitled “Development of Pressurized Brake Bleeder Pump” was conducted at the Automotive Technology Department of the Cavite State University-CCAT Campus. The design, fabrication, and evaluation of the prototype started last April 2017 and conducted until May 2018. The objective of the study was to develop and evaluate the Pressurized Brake Bleeder Pump. Specifically, the study aimed to; 1) design a Pressurized Brake Bleeder Pump,2) construct a Pressurized Brake Bleeder Pump as to its lay-out, specification and principles of operation out of locally available materials, 3)determine the ideal working pressure of developed prototype; 4) compare the time difference in bleeding process between conventional and pressurized bleeder pump; compare the conventional way of bleeding in terms of elapsed time; 5.Measure the amount of fluid needed to recondition a whole brake system (owner type jeep for instructional purpose); and 6. conduct cost analysis for the fabrication of Pressurized Brake Bleeder Pump (for Bleeding Brakes). The pressurized brake bleeder pump was designed with a pressurized tank, analog pressure gauge, service hose, gate valve, mechanical pump and master cap. It was designed and constructed for reconditioning the brake system and maintenance purposes. The total initial cost building the project was PHP 3,838.00.
546			_aIn English text.
650			_aBrake bleeder pump. _96009
650			_aPrototype, Engineering. _95310
650			_aCost analysis. _95484
650			_aBrake system and maintenance. _96010
700			_aJonas, Vincent Angelo P., Author. _96008
700			_aLuig, Jerome D., Author. _96011
700			_aSantos, Ariel G., Adviser. _95814
700			_aDela Peña, Richard V., Technical Critic. _96012
942			_cT/M/D _hTL255 J66 2018 _kUM _2lcc
999			_c1828 _d1828