000			03329nam a22003377a 4500
003			OSt
005			20220810003620.0
008			220808b ||||| |||| 00| 0 eng d
040			_aCvSU-CCAT Campus Library. _bEnglish. _cCvSU-CCAT Campus Library. _erda.
050			_aUM TJ1187 _bE88 2018
100			_aEstanil, James Marlo D., Author. _95940
245			_aDevelopment of Adjustable V-BLock / _cJames Marlo D. Estanil and Russel C. Zulueta.
260			_aRosario, Cavite : _bCavite State University-CCAT Campus, _c2018.
300			_axii, 48 leaves : _billustrations ; _c28 cm
500			_aDesign Project (BSIT)major in Mechanical Technology--Cavite State University-CCAT Campus, 2018.
504			_aIncludes bibliographical references and appendices.
520			_aZULUETA, RUSSEL C. and ESTANIL, JAMES MARLO D. Development of Adjustable V-block. Undergraduate Thesis. Bachelor of Science in Industrial Technology. Major in Mechanical Technology. Cavite State University- Rosario, Cavite. Adviser: Dr. Rodel B. Lubong. Technical Critic: Mr. William P. Luseco. The study was conducted from July 2016 to April 2017 to develop and evaluate of the adjustable V- block, specifically, the project aimed to: 1. design a Adjustable V-block 2. Construct a more functional metal equipment 3. Evaluate 4. Compute for the cost analysis of the project. The study was conducted at Cavite State University-Rosario Campus from December 2016 to April 2017 to develop and evaluate an adjustable V-block. Specifically, the study aimed to: 1) construct an adjustable V-block with clamp;2) compare the adjustable V-block using bench vise 3) evaluate the adjustable V-block efficiency using 40mm diameter to 200mm. diameter holding adjustable V-block; and the efficiency of adjustable V-block in compliance with the standard acceptable criteria in holding work piece.4) conduct cost analysis for the adjustable V-block. The adjustable V-block was designed with 5 main parts, the holding round bar that will hold the work piece, the guide ways into the adjustment and holding work piece, and the body that where the holding round bar is placed. Testing and evaluation was conducted in 1 day. The adjustable V-block were measured and compared. Data collected were analyzed to determine the adjustable V. block efficiency. Performance efficiency of the adjustable V-block was assessed in terms of hold of V-block. The most efficient way to holding a work piece is the cutting, drilling and sundering work piece. The more hardened the work piece the more difficult to holding for safety usage the hold don't move a work piece. The developed device can hold a minimum 40mm and the maximum can be hold is 200mm of round bar. The total cost of the project is PHP.4,601.00.
546			_aIn English text.
650			_aAdjustable V-Block. _95941
650			_aMetal equipment. _95942
650			_aBench vise. _95943
650			_aMachine tools. _91998
650			_aHolding capacity. _95944
650			_aPrototype, Engineering. _95310
650			_aCost analysis. _95484
700			_aZulueta, Russel C., Author. _95945
700			_aLubong, Rodel B., Adviser. _95923
700			_aLuseco. William P., Technical critic. _95670
942			_cT/M/D _hTJ1187 E88 2018 _kUM _2lcc
999			_c1819 _d1819