000			02931nam a22002777a 4500
003			OSt
005			20220628221805.0
008			220628b ||||| |||| 00| 0 eng d
040			_bEnglish. _cCvSU-CCAT Campus Library. _erda.
050			_aUM TJ 1185 _bD45 2019
100			_aDeloverjes, Camille B., author. _95736
245			_aDevelopment of Electronics Wire Cutting Machine with Stripper / _cCamille B. Deloverjes.
260			_aRosario, Cavite : _bCavite State University-CCAT Campus, _c2019
300			_axii, 35 leaves : _billustrations ; _c28 cm
500			_aUndergraduate Design Project (BSCpE)--Cavite State University-CCAT Campus, 20189
504			_aIncludes bibliographical references and appendices.
520			_aDELOVERJES, CAMILLE B. Development of Electronics Wire Cutting Machine with Stripper. Undergraduate Design Project. Bachelor of Science in Computer Engineering. Cavite State University-Cavite College of Arts and Trades Campus, Rosario, Cavite. June 2019. Adviser: Engr. Diane P. Arayata and Technical Critic: Efrain P. Aguasa. The study was conducted from December 2017 to May 2019 to develop an Automatic electronics wire cutting machine. Specifically, the study aimed to: 1) design and construct a low-cost wire cutter and stripper machine; 2) design a software that can control the quantity and size of wires to be cut; 3) evaluate the software and hardware components; 4) evaluate the accuracy of the device in terms of uniformity of cut, size, cutting capacity, effectivity of stripping; and 5) conduct cost analysis. At Cavite State University - CCAT Campus the technical evaluation of the device was done. A 220V AC powered the machine. The enclosure was made from a galvanized sheet metal. The device has a dimension of 65cm x 36cm x 47cm. It was composed of an Arduino mega, 3 stepper motors, keypad, and a 4 x 20 characters LCD. An Arduino mega is a microcontroller board based on the ATmegal280 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. A 4x20 characters LCD Display works with 5v DC and has a dimension of 98mm x 60mm x 12mm. The device was focused to cut electronics wire with the size of 16 AWG up to 20 AWG. The device was focused to cut electronics wire only up to its range of quantity. And also the device emphases to cut electronics wire only on specified sizes.
650			_aMachine-tools _xDesign and construction. _95737
650			_aMetal-cutting tools _xDesign and construction. _95738
650			_aAutomatic wire cutting machine. _95739
650			_aStripper machine. _95740
700			_aArayata, Diane P., author. _95741
700			_aAguasa, Efrain P., critic. _95742
942			_2lcc _cT/M/D _hTJ 1185 _iD45 2019 _kUM
999			_c1790 _d1790