000			03052nam a22002897a 4500
003			OSt
005			20220615015903.0
008			220609b ||||| |||| 00| 0 eng d
040			_bEnglish. _cCvSU-CCAT Campus Library. _erda.
050			_aUM TJ 828 _bB47 2019
100			_aBernabe, Ralph Agustin S., author _95162
245			_aPerformance Analysis of Diffuser-Augmented Wind Turbine System / _cRalph Agustin S. Bernabe, and Marco Austin C. De Ocampo
260			_aRosario, Cavite : _bCavite State University-CCAT Campus, _c2019
300			_axiii, 45 leaves : _billustrations ; _c28 cm
500			_aProject Design (BSEE)--Cavite State University-CCAT Campus, 2019.
504			_aIncludes bibliographical references and appendices.
520			_aBERNABE, RALPH AGUSTIN S., and DE OCAMPO, MARCO AUSTIN C. Performance Analysis of Diffuser-Augmented Wind Turbine System. A Design Project. Bachelor of Science m Electrical Engineering. Cavite State University-Cavite College of Arts and Trades Campus, Rosario, Cavite. June 2019. Adviser: Engr. Dexter S. Ramos. Technical Critic: Engr. John Robert G. Briones. The study was conducted from August 2018-March 2019 to compare the performance of diffuser-augmented wind turbine system Specifically, this study aimed to design and develop a laboratory-scale diffuser-augmented wind turbine which will convert wind energy into electrical energy; test and evaluate the performance of the design of the diffuser augmented wind turbine as affected by the diameter of the inlet diffuser, diameter of the outlet diffuser, and angle of inclination of the blades; and compare the total power generated in each setup. The voltage output and the speed of the rotor blades of thirty combinations of diameter of inlet and outlet and inclination of rotor blades were observed and recorded. The results revealed that the size of the inlet diffuser, outlet diffuser, and the inclination of the rotor blades directly affect the voltage output and speed of the rotor blades. The increase in the diameter of the inlet diffuser increases the average rpm and voltage output white the increase in the blade inclination and diameter of the outlet diffuser decreases their values. The 30° inclination of the rotor blade, 20-cm diameter of the inlet diffuser and 25-cm diameter of the outlet diffuser is the most efficient design which produced 1093.4 rpm of the blade and 3.8488 V. The study also showed that the ratio of the size of inlet diffuser to the ratio of the siz.e of the blade must not to be 56 percent or less because the air flow to the inlet diffuser will not be sufficient to rotate the blades.
650			_aWind turbines _95163
650			_aPower electronics _91790
650			_aElectric generators _91791
650			_aWind power _95164
700			_aDe Ocampo, Marco Austin C., author _94795
700			_aRamos, Dexter S., adviser _94795
700			_aBriones, John Robert G., technical critic _94828
942			_2lcc _cT/M/D _hTJ 828 _iB47 2019 _kUM
999			_c1712 _d1712