Custom cover image
Custom cover image

CCS particle board as an alternative source of lawanit / Juan Paulo L. Daganasol, Mark Emill F. Dela Cruz, and Sedrick Jedge C. Esguerra.

By: Contributor(s): Material type: TextPublication details: Rosario, Cavite : Cavite State University-CCAT Campus, 2011Description: xvi, 56 leaves : illustrations ; 28 cmSubject(s): LOC classification:
  • UM TS 875 D34 2011
Summary: Daganasol, Juan Paulo L., dela Cruz, Mark Emill F., Esguerra, Sedrick Jedge C., Science Education Laboratory School Cavite State University Rosario Campus Rosario, Cavite 2009-2011, "Ccs Particle Board as An Alternative Source Of Lawanit " Adviser Prof. Remedios G. Lisondra The research study entitled "CCS Particle Board as an Alternative Source of Lawanit was conducted at Tejeros Convention Rosario, Cavite. Furthermore, the experiment and observations were made at the Department of Science and Technology Forest Products and Research Development Institute, U.P. Los Baños, Laguna. Generally, this study aimed to find if it is possible to use mixed coconut coir and corn silk as raw materials in making particle board. Specifically, this study aimed to determine the significant difference between the commercial Lawanit and the "Coco Coirn Silk Board" (CCS Board) in terms of strength, water absorption, thickness swelling and internal bond. This study used the Randomized Complete Block Design (RCBD) with three replications to determine the significant difference between the commercial Lawanit and the particle board. The statistical treatment applied was the formula for the Modulus of Rupture (MOR), Water Absorption, Thickness Swelling and Inter Bond given by the DOST - FPRDI. Moreover, the t- test was used to obtain the significant difference in the 4 properties. The coconut husks were gathered at a coconut stall in Tejeros Convention Rosario, Cavite. Some were provided by DOSTFPRDI; corn silks from Mr. Narciso Vergara and a corn stall in Divisoria. They were sun dried and coir were shredded firmly and were mixed together with the binder, phenol formaldehyde, in the shallow tub according to the following treatments To Commercial Lawanit, [T1-75% (275 g) Coir + 25% (92 g) Silk, T2-50% (184 g) coir + 50% (184 g) Silk, T3-75% (275 g) Silk + 25% (92 g) silk). Then it was molded on a wooden molder. Molder was removed from the treatment and was "hot pressed" After, was then the boards were cut into dimensions and were tested in terms of strength, water absorption, thickness swelling and internal bond and the data were analyzed. Results showed that the three treatments and the commercial Lawanit have a significant difference in terms of strength, water absorption, thickness swelling and internal bond. The results of t-test were greater than the tabular value of ± 2.92
Tags from this library: No tags from this library for this title. Log in to add tags.
Star ratings
    Average rating: 0.0 (0 votes)
Holdings
Cover image Item type Current library Home library Collection Shelving location Call number Materials specified Vol info URL Copy number Status Notes Date due Barcode Item holds Item hold queue priority Course reserves
Thesis/Manuscripts/Dissertations Cavite State University - CCAT Campus Thesis/Manuscript/Dissertation TH UM TS 875 D34 2011 (Browse shelf(Opens below)) 1 Available T00055

Research Study (LSHS) -- Cavite State University-CCAT Campus, 2011.

Includes bibliographical references and appendices.

Daganasol, Juan Paulo L., dela Cruz, Mark Emill F., Esguerra, Sedrick Jedge C., Science Education Laboratory School Cavite State University Rosario Campus Rosario, Cavite 2009-2011, "Ccs Particle Board as An Alternative Source Of Lawanit " Adviser Prof. Remedios G. Lisondra

The research study entitled "CCS Particle Board as an Alternative Source of Lawanit was conducted at Tejeros Convention Rosario, Cavite. Furthermore, the experiment and observations were made at the Department of Science and Technology Forest Products and Research Development Institute, U.P. Los Baños, Laguna. Generally, this study aimed to find if it is possible to use mixed coconut coir and corn silk as raw materials in making particle board. Specifically, this study aimed to determine the significant difference between the commercial Lawanit and the "Coco Coirn Silk Board" (CCS Board) in terms of strength, water absorption, thickness swelling and internal bond.

This study used the Randomized Complete Block Design (RCBD) with three replications to determine the significant difference between the commercial Lawanit and the particle board. The statistical treatment applied was the formula for the Modulus of Rupture (MOR), Water Absorption, Thickness Swelling and Inter Bond given by the DOST - FPRDI. Moreover, the t- test was used to obtain the significant difference in the 4 properties.

The coconut husks were gathered at a coconut stall in Tejeros Convention Rosario, Cavite. Some were provided by DOSTFPRDI; corn silks from Mr. Narciso Vergara and a corn stall in Divisoria. They were sun dried and coir were shredded firmly and were mixed together with the binder, phenol formaldehyde, in the shallow tub according to the following treatments To Commercial Lawanit, [T1-75% (275 g) Coir + 25% (92 g) Silk, T2-50% (184 g) coir + 50% (184 g) Silk, T3-75% (275 g) Silk + 25% (92 g) silk). Then it was molded on a wooden molder. Molder was removed from the treatment and was "hot pressed" After, was then the boards were cut into dimensions and were tested in terms of strength, water absorption, thickness swelling and internal bond and the data were analyzed.

Results showed that the three treatments and the commercial Lawanit have a significant difference in terms of strength, water absorption, thickness swelling and internal bond. The results of t-test were greater than the tabular value of ± 2.92

In English text.

There are no comments on this title.

to post a comment.