Development of portable guided bend weld tester /
Onsana, Marvin V., Author.
Development of portable guided bend weld tester / Marvin V. Onsana, Aldwin M. Crudo, and Bryan E. Manaloto. - Rosario, Cavite : Cavite State Unviersity-CCAT Campus, 2018. - xv, 77 leaves : illustrations ; 28 cm
Design Project (BSIT)major in Stationary MArine Technology--Cavite State University-CCAT Campus, 2018.
Includes bibliographical references and appendices.
ONSANA, MARVIN V., CRUDO, ALDWIN M., and MANALOTO,BRYAN E, Development of Portable Guided bend weld tester. Undergraduate Design Project. Bachelor of Science in Industrial Technology. Cavite State University Rosario Campus, Rosario, Cavite. March 2017. Adviser: Mr. Nestor M. Alvarez. Technical critic: Danilo G. Santiago.
The study was conducted from July 2015 to April 2017 to develop portable guide bend weld tester. Specifically, the project aimed to: 1. design a Portable Guided Bend Weld Tester 2; construct a more convenient equipment in testing the quality of weld; 3.evaluate the effectiveness of portable guided bend weld tester in compliance in with standard acceptable criteria on welding in terms of a. compare the pressure needed to bend a mild still based on bending tonnage guide table.
Portable Guided bend weld tester was developed to test the quality strength of a butt joint sample weld metal, it was a destructive testing applying a high pressure force to deformed the test subject, and evaluate the result.
It has hydraulic bottled jack that act as the source of pressure and a “U” shape mild steel connected on it that push upward to get connected on the “I” shape mild steel connected on the upper metal based.
The developed device can bend a minimum 6.3 mm and maximum thickness up to 12.7 mm of mild steel. The total cost of the project was PHP. 31,963.2
In English text.
Welded joints.--Testing.
Weld quality.
Bending tonnage guide table.
Prototype, Engineering.
Cost analysis.
UM TA 492.W4 / O57 2018
Development of portable guided bend weld tester / Marvin V. Onsana, Aldwin M. Crudo, and Bryan E. Manaloto. - Rosario, Cavite : Cavite State Unviersity-CCAT Campus, 2018. - xv, 77 leaves : illustrations ; 28 cm
Design Project (BSIT)major in Stationary MArine Technology--Cavite State University-CCAT Campus, 2018.
Includes bibliographical references and appendices.
ONSANA, MARVIN V., CRUDO, ALDWIN M., and MANALOTO,BRYAN E, Development of Portable Guided bend weld tester. Undergraduate Design Project. Bachelor of Science in Industrial Technology. Cavite State University Rosario Campus, Rosario, Cavite. March 2017. Adviser: Mr. Nestor M. Alvarez. Technical critic: Danilo G. Santiago.
The study was conducted from July 2015 to April 2017 to develop portable guide bend weld tester. Specifically, the project aimed to: 1. design a Portable Guided Bend Weld Tester 2; construct a more convenient equipment in testing the quality of weld; 3.evaluate the effectiveness of portable guided bend weld tester in compliance in with standard acceptable criteria on welding in terms of a. compare the pressure needed to bend a mild still based on bending tonnage guide table.
Portable Guided bend weld tester was developed to test the quality strength of a butt joint sample weld metal, it was a destructive testing applying a high pressure force to deformed the test subject, and evaluate the result.
It has hydraulic bottled jack that act as the source of pressure and a “U” shape mild steel connected on it that push upward to get connected on the “I” shape mild steel connected on the upper metal based.
The developed device can bend a minimum 6.3 mm and maximum thickness up to 12.7 mm of mild steel. The total cost of the project was PHP. 31,963.2
In English text.
Welded joints.--Testing.
Weld quality.
Bending tonnage guide table.
Prototype, Engineering.
Cost analysis.
UM TA 492.W4 / O57 2018