Development of Go and No Go Gage / Darren Christopher P. Hinalog and Raymond A. Toledo.

By:

Hinalog, Darren Christopher P., Author

Contributor(s):

Material type:

TextPublication details: Rosario, Cavite : Cavite State University-CCAT Campus, 2017.Description: xi, 43 leaves : illustrations ; 28 cmSubject(s):

LOC classification:

UM TJ 1260 H56 2017

Summary: HINALOG, DARREN CHRISTOPHER P. and TOLEDO, RAYMOND A. Development of Go and No Go Gage.Undergraduate design project. Bachelor of Science and Industrial Technology Major in Mechanical Technology.Cavite State University Rosario Campus, Rosario, Cavite. March 2016. Adviser. Mr. Nestor Alvarez. Technical critic: Mr. Romulo B. Isorena. The study was conducted from July 2015 to February 2016 to develop and evaluate a Go and No Go gage instrument. This study aimed to; 1) design the Go and No Go gage; 2) construct it using available supplies and material in the local market; 3) evaluate the functionality and accuracy of the project; and 4) conduct cost analysis of the project. Go and No Go gage was constructed with 5 different sizes of 12mm,14mm, 16mm,18mm and 20mm. The instrument was used to determine the inside diameter of the pipe whether it was within the acceptable tolerance. The used of each gage was according to the diameter or the size of the hole of the work piece. The Go and No Go Gage was designed in accordance the International Tolerance Standard (ITS) and was machined with preciseness and ground to attain the desired surface finish. The Go and No Go Gage was commonly used in machining and quality control of mass produced parts. The accuracy in measurements of the Go and No Go Gage was more dependable than that of the Vernier Caliper and more convenient and faster to use.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings
Cover image	Item type	Current library	Home library	Collection	Shelving location	Call number	Materials specified	Vol info	URL	Copy number	Status	Notes	Date due	Barcode	Item holds	Item hold queue priority	Course reserves
	Thesis/Manuscripts/Dissertations	Cavite State University - CCAT Campus		Thesis/Manuscript/Dissertation	TH	UM TJ 1260 H56 2017 (Browse shelf(Opens below))				c.1	Available			T0002959
	Thesis/Manuscripts/Dissertations	Cavite State University - CCAT Campus		Thesis/Manuscript/Dissertation	TH	UM TJ 1260 H56 2017 (Browse shelf(Opens below))				c.2	Available			T0005240

Undergraduate Thesis (BSIT)--Cavite State University-CCAT Campus, 2017.

Includes bibliographical references and appemdices.

HINALOG, DARREN CHRISTOPHER P. and TOLEDO, RAYMOND A. Development of Go and No Go Gage.Undergraduate design project. Bachelor of Science and Industrial Technology Major in Mechanical Technology.Cavite State University Rosario Campus, Rosario, Cavite. March 2016. Adviser. Mr. Nestor Alvarez. Technical critic: Mr. Romulo B. Isorena.

The study was conducted from July 2015 to February 2016 to develop and evaluate a Go and No Go gage instrument. This study aimed to; 1) design the Go and No Go gage; 2) construct it using available supplies and material in the local market; 3) evaluate the functionality and accuracy of the project; and 4) conduct cost analysis of the project.

Go and No Go gage was constructed with 5 different sizes of 12mm,14mm, 16mm,18mm and 20mm. The instrument was used to determine the inside diameter of the pipe whether it was within the acceptable tolerance. The used of each gage was according to the diameter or the size of the hole of the work piece. The Go and No Go Gage was designed in accordance the International Tolerance Standard (ITS) and was machined with preciseness and ground to attain the desired surface finish.

The Go and No Go Gage was commonly used in machining and quality control of mass produced parts.

The accuracy in measurements of the Go and No Go Gage was more dependable than that of the Vernier Caliper and more convenient and faster to use.

In English text.

There are no comments on this title.

to post a comment.