Development of a pneumatic sheet metal cutting machine / Carl Joshua B. Arcegono, John Kim D. Mengay, and Rommel Von Erwin C. Sorino.

By:

Arcegono, Carl Joshua B., Author

Contributor(s):

Material type:

TextPublication details: Rosario, Cavite : Cavite State University-CCAT Campus, 2018.Description: xiii, 39 leaves : illustrations ; 28cmSubject(s):

LOC classification:

UM TJ 950 A73 2018

Summary: ABSTRACT ARCEGONO, CARL JOSHUA B., MENGAY, JONH KIM D., and SORIÑO, ROMMEL VON ERWIN C,. Development of Pneumatic Sheet Metal Cutting Machine Undergraduate Design Project. Bachelor of Science in Industrial Technology. Cavite State University Rosario Campus,Rosario,Cavite. May 2018. Adviser: Mr. Nestor M. Alvarez. Technical critic: Mr. Romulo B. Isorena. The study was conducted at Cavite State University Rosario Cavite Campus in Brgy.Tejeros Convention, Rosario Cavite from November 2016 to May 2017 to develop a Pneumatic Sheet Metal Cutting Machine. Specifically,the study aimed to: 1) design sheet metal cutter; 2) construct sheet metal cutter using available materials and manpower;and 3) evaluate the performance of the prototype in terms of time response of cutting and proper pressure needed on different thickness of metal. The pneumatic sheet metal cutting machine was designed mainly to cut angle bars for support and braces. A 300 psi capacity pneumatic cylinder was used in this machine. It can cut different gauge such as; 36,32,28,26,24,22,20 and 18 sheet metal and it can cut up to 15 inches long. The pneumatic sheet metal cutting machine was evaluated in terms of time response and pressure needed to apply in cutting a different gauge of sheet metal.The performance of pneumatic sheet metal cutting machine was assessed by using a different thickness of sheet metal. The operators of the machine must have enough training or practice to do the job fast and accurately. The response time of the machine in cutting a sheet metal varies in gauge used. Thus, the thinner the sheet metal, the faster the machine can perform. The pressure of the pneumatic sheet metal cutting machine varies depending on the thickness of the sheet metal. In different gauge of sheet metal there's an applicable pressure needed to apply.Thus, the thicker the sheet metal, the higher the pressure needed. The total cost of the project is PHP 39,553.00.

Tags from this library: No tags from this library for this title. Log in to add tags.

Average rating: 0.0 (0 votes)

Holdings
Cover image	Item type	Current library	Home library	Collection	Shelving location	Call number	Materials specified	Vol info	URL	Copy number	Status	Notes	Date due	Barcode	Item holds	Item hold queue priority	Course reserves
	Thesis/Manuscripts/Dissertations	Cavite State University - CCAT Campus		Thesis/Manuscript/Dissertation	TH	UM TJ 950 A73 2018 (Browse shelf(Opens below))				c.1	Available			T0003597
	Thesis/Manuscripts/Dissertations	Cavite State University - CCAT Campus		Thesis/Manuscript/Dissertation	TH	UM TJ 950 A73 2018 (Browse shelf(Opens below))				c.2	Available			T0005239

A Design Project Study (BSIT) Major in Mechanical Technology--Cavite State University-CCAT Campus, 2018.

Includes bibliographical references and appendices.

ABSTRACT

ARCEGONO, CARL JOSHUA B., MENGAY, JONH KIM D., and SORIÑO, ROMMEL VON ERWIN C,. Development of Pneumatic Sheet Metal Cutting Machine Undergraduate Design Project. Bachelor of Science in Industrial Technology. Cavite State University Rosario Campus,Rosario,Cavite. May 2018. Adviser: Mr. Nestor M. Alvarez. Technical critic: Mr. Romulo B. Isorena.

The study was conducted at Cavite State University Rosario Cavite Campus in Brgy.Tejeros Convention, Rosario Cavite from November 2016 to May 2017 to develop a Pneumatic Sheet Metal Cutting Machine. Specifically,the study aimed to: 1) design sheet metal cutter; 2) construct sheet metal cutter using available materials and manpower;and 3) evaluate the performance of the prototype in terms of time response of cutting and proper pressure needed on different thickness of metal.

The pneumatic sheet metal cutting machine was designed mainly to cut angle bars for support and braces. A 300 psi capacity pneumatic cylinder was used in this machine. It can cut different gauge such as; 36,32,28,26,24,22,20 and 18 sheet metal and it can cut up to 15 inches long.

The pneumatic sheet metal cutting machine was evaluated in terms of time response and pressure needed to apply in cutting a different gauge of sheet metal.The performance of pneumatic sheet metal cutting machine was assessed by using a different thickness of sheet metal.

The operators of the machine must have enough training or practice to do the job fast and accurately. The response time of the machine in cutting a sheet metal varies in gauge used. Thus, the thinner the sheet metal, the faster the machine can perform. The pressure of the pneumatic sheet metal cutting machine varies depending on the thickness of the sheet metal. In different gauge of sheet metal there's an applicable pressure needed to apply.Thus, the thicker the sheet metal, the higher the pressure needed. The total cost of the project is PHP 39,553.00.

In English text.

There are no comments on this title.

to post a comment.